Poultice Stain Remover For Marble

If a spill or stain happens and you don t have a special marble cleaning product in the house all is not lost.

Poultice stain remover for marble. One thing to note is that this poultice can remove the sealer on your marble along with the stain so you may need to reapply sealer to the area where your poultice sat. Mixed with fresh water on site the poultice forms into a smooth paste for trowel application to horizontal vertical and overhead surfaces. Cover the mixture with plastic wrap and smooth the surface with your hands to remove as much air as possible.

Well known for its cleaning properties it can be also quite effective in preventing and removing stains from your marble or stone floor or surface. Use baking soda or talc for your powder base. Baking soda also known as bicarbonate of soda is the answer.

Baking soda works especially well for food and oil based stains. Your marble might also look wet for 24 hours or so. Dampen the stain with a small amount of the same liquid used to make the poultice.

Exceed the diameter of the stain by a half inch to ensure complete coverage. Marble poultice is a smooth paste suitable for trowel application to horizontal vertical and overhead surfaces monumentique paste c is a non hazardous synthetic latex cleaning compound for removal of surface soiling. The water will allow for the poultice to penetrate the pours of marble and remove the stain.

Wipe the stain clean of any loose girt or dirt and clean with a marble cleaner. Cover the stain with the mixture a quarter inch to a half inch thick. Be sure the stain is covered in a small amount of water.

After the product has been applied and left to dwell it will dry to a skin which can be easily peeled off. The poultice will at a minimum lift the bulk of a stain but is no guarantee of complete removal for those marble stains that are aged or deep seated this may require the services of a professional.