Back Rolling Painting Technique

The process of back rolling after spraying should be carried out as standard practice especially when new plasterboard surfaces are involved for three specific reasons.

Back rolling painting technique. Back rolling is the process of painting a second time while the first coat is still wet in order to fill in sections and deepen the color. Don t press too hard when you re smoothing out the paint. Back rolling pushes paint into cracks and wood grain dramatically improving the finished look of the paint job.

Don t submerge the roller in the paint to load it. Back roll the main area. You must return to the area soon after that first coat has been laid.

This takes place during spray paint application. The technique is effective when painting overhangs and exterior walls. If you wait too long the first coat will be tacky and will result in a textured not smooth finish.

Paint the trim leave at least one day for the paint to cure before painting window and door trim as well as eaves fascia and other similar house elements. This texture will scatter the. Back rolling and back brushing.

Two house painting techniques used to push the primer or paint into the surface is back rolling and back brushing. Paint can seep inside the roller cover and leak out while you re. Back rolling is the act of using a roller to spread paint across a surface immediately after spraying.

Never start against an edge like a corner or molding with a full roller of. The process of back rolling involves the use a paint roller to press the paint that was previously applied by sprayer firmly and evenly into the surface of the wall. Known as back rolling this technique is used by professional painters to produce a coat with both the smoothness of rolling and the speed of spraying.